News

PE Transparent Low to High Tack Electrostatic Protective Film

Electrostatic film is actually made with a kind of electrostatic fluid, co-extruded on the surface of original PE film, to play a role of adhesion. People also name it as self-absorptive film, self-adhered tape, non glue film or non-gel film. Electrostatic protection film use the electrostatic adsorption force as the self adhesive force, no glue,small adhesion force variation, easy to peel off.

Quantity:


Electrostatic Film-1


Electrostatic Film

Electrostatic film is actually made with a kind of electrostatic fluid, co-extruded on the surface of original PE film, to play a role of adhesion. People also name it as self-absorptive film, self-adhered tape, non glue film or non-gel film. Electrostatic protection film use the electrostatic adsorption force as the self adhesive force, no glue,small adhesion force variation, easy to peel off.


Specification parameters

1. Thickness: normally 30-50 microns, can be customized made within the range of 30-80 microns.

2. Color: Commonly made with high transparency, can be other single color as requested.

3. Width: normally 1000-1300mm, can be cut into narrow widths like 100/200/500mm.

4. Length: 200/400/500/1000/2000 meter per roll. 

5. Adhesion: 0.5-300g/25mm

6. Elongation: >200%

7. Temperature resistance: Ok with temperature below 70 degree C, if you need the film resist high temperature over 70 DC, please check with other film series.


Electrostatic Film-4


Material use

It is made with 100% purity new LDPE material as the substrate. It can be used in following industries:


1. Used for all kinds of plastic sheet and injection parts surface protection: such as PP, PVC, ABS, PC, PMMA, PA, PS sheet/board/frame materials, self-adhesive or electrostatic adsorption on the high gloss surface for protection.

2, suitable for all kinds of aluminum alloy, aluminum foil, copper foil, tin foil, stainless steel, galvanized sheet and anodized surface for anti-dust protection.


3, suitable for all kinds of plexiglass, inorganic glass, artificial crystal, handicraft surface dustproof fingerprint protection.

4. It is suitable for all kinds of painting parts, oil spraying parts shielding and color protection.

5. LCD display, backlight panel, cold light panel, light guide panel, film switch and mobile phone screen protection.


Instructions

1. Surfaces to be protected should be dry, free from dust, oil, solvents or other chemicals in case of any residue is caused by the chemical reaction with our film adhesive. 

2. The best results are obtained with temperature of surface and surroundings at +15°C to 40°C. 

3. Use laminating machines with rubber coated press rollers. 

4. Try to eliminate or minimize film elongation, and the formation of air bubbles and folds during lamination. 

5. Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C). 

6.The film is not suitable for extreme thermoforming.


Scenes to be used

Electrostatic Film for plastic sheet

Electrostatic Film for glass


Electrostatic Film-2Electrostatic Film-3



Standard roll will be wrapped with bubble film or paper board, and then put into cartons and stacked on pallets as per export packing requirement. Special packaging requirement can be negotiated.